Accessories

Filter
Set Descending Direction

215 items

Page
per page
View as List Grid
  1. Skin Conductance Sensor
    Skin Conductance sensor (SA9309M) for use with Thought Technology ProComp Plus, ProComp Infiniti, ProComp 2 or 5, or FlexPro series systems. Learn More
    $355.00
  2. Thought Technology ECG/EKG Sensor (SA9306M)
    The Thought Technology pre-amplified electrocardiograph (ECG/EKG) sensor (T9306M) for the Procomp Infiniti Systems or Procomp+. Used for directly measuring electrical activity of the heart. Learn More
    $355.00
  3. Used Thought Technology EEG Gold Ear Clip - Black
    The Though Technology SA9321 is a single gold EEG ear clip electrode on one end with a 1.5mm (.060) DIN connection on the other end. For use with the T8740 DIN Cable or and standard DIN socket. Approximately 18" in length. Learn More
    $20.00
  4. Used Thought Technology EEG Gold Ear Clip - Yellow
    The Though Technology SA9321 is a single gold EEG ear clip electrode on one end with a 1.5mm (.060) DIN connection on the other end. For use with the T8740 DIN Cable or and standard DIN socket. Approximately 18" in length. Learn More
    $20.00
  5. Used EMG Sensor for FlexComp/Myotrac
    The used SA9503M surface EMG sensor consists of a triangular shape sensor head (SA9503M) with 3 snap style receptacles representing 2 active (positive & negative) electrodes and 1 reference (ground) electrode. Learn More
    $150.00
  6. MyoScan-Pro v2 sEMG Sensor
    The Myoscan-Pro v2 (SA9401M-60) surface EMG sensor consists of 3 snap style receptacles - 2 active (positive & negative) and 1 reference (ground). Learn More
    $475.00
  7. DC-EEG Monopolar/Bipolar Kit
    This EEG lead kit allows users to make either monopolar or bipolar single channel measurements. 1.5 mm DIN Connector to disc. Sintered silver/silver-chloride (Ag/AgCl) EEG electrodes and ear clips for DC and low frequency EEG applications. Cable is appox 40" in length. Learn More
    $215.00
  8. EEG-Z3 Sensor
    EEG-Z3 is a pre-amplified electroencephalograph sensor with built in impedance checking and 3 modes of operation: regular EEG mode (above 2 Hz), low frequency mode (above 0.01 Hz) for evoked potentials (EP) and low frequency applications and DC mode for true DC operation (above 0 Hz) for slow cortical potentials (SCP). Learn More
    $595.00
  9. Remote Finger Sensor For GSR2
    Remote Finger Sensor for GSR 2. Plugs into the side of the GSR 2 to allow for use of two finger sensors. Learn More
    $36.00
  10. sEMG Snap Cable - 40 inch
    The T8820M Thought Technology sEMG cable is 40 inches(101cm)Protected pin snap style leads, 1 positive, 1 negative and 1 ground for use with most Thought Technology products. Yellow negative, blue positive, black reference. Learn More
    $42.00
Filter
Set Descending Direction

215 items

Page
per page
View as List Grid