Sensors

ProComp Infiniti Heart Rate/BVP (SA9308M)sensor & cable is 48 inches (122.5 cm) in length and is terminated in a small plastic enclosure which houses both the Photodetector and LED. Used with Thought Technology ProComp Plus, ProComp Infiniti, ProComp 2, Procomp5, or Flexcomp series systems. Learn More

Skin Conductance sensor (SA9309M) for use with Thought Technology ProComp Plus, ProComp Infiniti, ProComp 2 or 5, or FlexPro series systems. Learn More

ProComp Infiniti respiration sensor & cable (SA9311M) is approximately 52 inches (132 cm) in length and is terminated in a stretch belt that will fit around either the thoracic (chest) or abdominal (stomach) area. The respiration sensor is a sensitive girth sensor worn using an easy fitting high durability woven elastic band fixed with a length adjustable webbing belt. It detects chest or abdominal expansion/contraction and outputs the respiration waveform. Learn More

The Thought Technology pre-amplified electrocardiograph (ECG/EKG) sensor (T9306M) for the Procomp Infiniti Systems or Procomp+. Used for directly measuring electrical activity of the heart. Learn More

Physiocom Magnetic Respiration Sensor Belt for the GP series of biofeedback devices. Learn More

Blood Volume Pulse (BVP) Finger Sensor for GP-4 , GP-8 and GP-12 biofeedback devices from Physiocom Designs (formerly J&J Engineering). Can be used for Heart Rate Variability (HRV) training Learn More

Callibri is a wearable device embedded with ECG, EMG, EEG and respiratory sensors, as well as an accelerometer and angular velocity sensors to monitor physiological data on muscle movement and tension, breathing & heart rates. Callibri can be also used as electromyostimulation device. Learn More

Blood Volume Pulse (BVP) Finger Sensor for GP-4 , GP-8 and GP-12 biofeedback devices from Physiocom Designs (formerly J&J Engineering). Can be used for Heart Rate Variability (HRV) training Learn More

The Myoscan-Pro v2 (SA9401M-60) surface EMG sensor consists of 3 snap style receptacles - 2 active (positive & negative) and 1 reference (ground). Learn More

EEG-Z3 is a pre-amplified electroencephalograph sensor with built in impedance checking and 3 modes of operation: regular EEG mode (above 2 Hz), low frequency mode (above 0.01 Hz) for evoked potentials (EP) and low frequency applications and DC mode for true DC operation (above 0 Hz) for slow cortical potentials (SCP). Learn More