Biofeedback Equipment Accessories

ProComp Infiniti USB Adapter - TT-USB

This USB adapter for the Thought Technology ProComp2, Procomp5 and Procomp8 Infiniti encoders and software. Connects to the fiber optic cable to optically isolate client from the computer. Part # T7700 Learn More

$465.00

Voltage Isolator 4

The Voltage Isolator 4 Infiniti is an interface device which provides electrical isolation. It will allow Thought Technologys systems to be safely interfaced with analog outputs of line-powered systems, such as computers with DAC cards, isokinetic dynamometers, or force platforms. Learn More

$720.00

Optical Isolation Cable for GSR2

Optically isolates GSR2 and the computer from patient. 3.5mm standard audio jack for microphone input to computer to 2.5mm jack for GSR2 audio output. Learn More

$32.25

Neurofield Power Supply for X3000 or Q20

Neurofield power supply (one needed for each box. (The Q20 can also be placed on battery). Learn More

$375.00

Covidien Webcol Alcohol Prep Pads - formerly Curity

Covidien Webcol Alcohol Prep Pads 200/bx. Manufacturer Part# 6818. Each lightweight, medium 2-ply poly-lined pouch is saturated with 70% Isopropyl alcohol. Formerly Kendall Curity Alcohol Wipes. Learn More

$3.95 As low as $3.36

Used 1M2F Y-Connector

Used SA9315 connects a single electrode to two inputs. Allows use of the same electrode in two channels for common ground or reference. Learn More

$12.00

Bend Sensor with Adapter - SA9550

Bend Sensor is small enough to be placed on fingers and wrists to monitor joint motion. 180 degrees of flexion. Use sensors back to back to get a 360 degree range. Learn More

$295.00

Thought Technology Heart Rate/BVP Sensor

ProComp Infiniti Heart Rate/BVP (SA9308M)sensor & cable is 48 inches (122.5 cm) in length and is terminated in a small plastic enclosure which houses both the Photodetector and LED. Used with Thought Technology ProComp Plus, ProComp Infiniti, ProComp 2, Procomp5, or Flexcomp series systems. Learn More

$355.00

Skin Conductance Sensor

Skin Conductance sensor (SA9309M) for use with Thought Technology ProComp Plus, ProComp Infiniti, ProComp 2 or 5, or FlexPro series systems. Learn More

$355.00

Temperature Sensor for Procomp Infiniti

ProComp Infiniti (SA9310M) Temperature Sensor has a bead tip and is a Protected Pin style with a 4 pin barrel connector which slides into a receptacle located on a Thought Technology Encoder. Learn More

$255.00

Mon-Fri 9AM-5PM EST

Accessories

CONTACT INFO

Customer Service

Customer Care