Accessories

Filter
Set Descending Direction

215 items

per page
View as List Grid
  1. Callibri EEG/ECG/EMG Sensor
    Callibri is a wearable device embedded with ECG, EMG, EEG and respiratory sensors, as well as an accelerometer and angular velocity sensors to monitor physiological data on muscle movement and tension, breathing & heart rates. Callibri can be also used as electromyostimulation device. Learn More
    $299.00
  2. DIN EKG/EMG/EEG Snap Leads - 60 inch - 5 Lead Kit
    EMG/EEG/ECG leads, features MedSafe 1.5mm (.060) DIN connectors with snap style receptacles. 60 inch length leads, 5 per package. AHA/ AAMI standard colors for 5 lead placement. Colors Red, Black, White, Green and Brown. Learn More
  3. Used EMG Sensor for FlexComp/Myotrac
    The used SA9503M surface EMG sensor consists of a triangular shape sensor head (SA9503M) with 3 snap style receptacles representing 2 active (positive & negative) electrodes and 1 reference (ground) electrode. Learn More
    $150.00
  4. Tin Disc Cup Electrode
    E21-9S Disc Electrode 9mm Cup with 1.5mm DIN connector. A pure tin eeg cup electrode with a 48" (122 cm) lead wire. For use with Electro-Caps, Smart Brain Games and other systems that use tin ear electrodes. Learn More
  5. Used Temperature Sensor
    ProComp Infiniti (SA9310M) Temperature Sensor has a bead tip and is a Protected Pin style with a 4 pin barrel connector which slides into a receptacle located on a Thought Technology Encoder. Learn More
    $160.00
  6. Electro-Cap Tin Ear Electrodes Small Cups - 6mm
    Electro-Cap Tin Ear Electrodes, 6mm earclips (2/pkg). A pair of pure tin cup electrodes with a 48" (122 cm) lead wire and a 1.5mm DIN connector. A spring-clip back, covered with plastic for patient comfort, is used to hold the electrode in place. For use with Electro-Caps, Smart Brain Games and other systems that use tin ear electrodes Part # ECA E5-6S Learn More
  7. MyoScan-Pro v2 sEMG Sensor
    The Myoscan-Pro v2 (SA9401M-60) surface EMG sensor consists of 3 snap style receptacles - 2 active (positive & negative) and 1 reference (ground). Learn More
    $475.00
  8. DC-EEG Monopolar/Bipolar Kit
    This EEG lead kit allows users to make either monopolar or bipolar single channel measurements. 1.5 mm DIN Connector to disc. Sintered silver/silver-chloride (Ag/AgCl) EEG electrodes and ear clips for DC and low frequency EEG applications. Cable is appox 40" in length. Learn More
    $215.00
  9. EEG-Z3 Sensor
    EEG-Z3 is a pre-amplified electroencephalograph sensor with built in impedance checking and 3 modes of operation: regular EEG mode (above 2 Hz), low frequency mode (above 0.01 Hz) for evoked potentials (EP) and low frequency applications and DC mode for true DC operation (above 0 Hz) for slow cortical potentials (SCP). Learn More
    $595.00
  10. E4S Electro-Cap Quick Insert Electrode
    The E4S Quick insert electrode is a temporary electrode which will override the cap wiring in the event of a faulty electrode during a test. A Quick Insert Electrode may be placed into the mount of the faulty electrode and connected directly to the EEG machine until the cap can be properly repaired. Learn More
Filter
Set Descending Direction

215 items

per page
View as List Grid