Tensive Conductive Adhesive Gel - 50 Gram Tube - Box of 12

Tensive Conductive Adhesive Gel provides immediate conductivity and secure, tape-free adhesion for TENS, EMG, EEG, EP/ERP, long-term EEG, and PSG. It wipes off easily and is comparable to EC2/EC2+ electrode creams.

Tensive Key Benefits

• Conductive adhesive gel designed for TENS, EMG, EEG, and other electromedical procedures.
• Bacteriostatic; non-flammable and odorless.
• Water-soluble for easy cleanup.
• Not indicated for defibrillation (do not use for defib procedures).

When to Use

Get dependable contact, cleaner signals, and fewer do-overs. Tensive goes on smoothly, stays put without the mess. It rinses off with water, helping you move faster between patients while keeping comfort high and artifacts low.

• As the conductive/adhesive interface for TENS therapy electrodes.
• Surface EMG recordings with disposable/reusable electrodes.
• Routine scalp EEG with cup or disc electrodes.
• Other external, non-defibrillation electromedical applications on intact skin.

Application Instructions

1. Follow your device manufacturer's Instructions for Use for electrode setup.
2. Apply a thin, even film of Tensive to the electrode surface: place one drop at the center, then spread over the electrode.
3. Avoid excess gel, which can reduce adhesion to skin.

Clean Up

1. Peel electrodes off slowly while supporting the skin.
2. Wipe residual gel with a soft tissue or gauze.
3. Wash the area with warm water; use mild soap if any residue remains.
4. Pat dry before applying new electrodes.

Clean promptly after use to prevent build-up on electrodes and equipment. Avoid abrasive pads or metal brushes that can scratch electrode surfaces. Verify connectors are dry before reconnecting to devices.

Ingredients

Proprietary, water-soluble conductive adhesive gel with paraben preservatives (exact constituents not disclosed by manufacturer).

Safety Information

• For external use only on intact, unbroken skin.
• Do not use on patients with known sensitivity to parabens.
• In case of eye contact, rinse with plenty of water; if swallowed, seek medical attention.
• No OSHA or SARA hazards; non-flammable.

Storage and Handling

• Protect from direct sunlight; no special handling required (non-flammable, non-corrosive).
• Dispose of product per local, state, and federal regulations for non-hazardous waste.

Manuals and Data Sheets

Tensive Conductive Adhesive Gel Instructions for Use

Tensive Conductive Adhesive Gel SDS Sheet