The ProComp Infiniti is an 8 channel, biofeedback and neurofeedback system with the power needed for real-time data acquisition in any clinical or educational setting.

This device has 8 protected pin sensor inputs with two channels sampled at 2048 sampes per second and six channels sampled at 256 samples per second.

The ProComp Infiniti encoder is able to render a wide and comprehensive range of objective Physiological signs used in clinical observation and biofeedback.

The first two sensor channels of the Infiniti encoder provide ultimate signal fidelity (2048 samples per second) for viewing raw EEG, EMG and EKG signals. The remaining six channels (256 samples/sec) can be used with any combination of sensors, including EEG, EKG, RMS EMG, skin conductance, heart rate, blood volume pulse, respiration, goniometry, force, and voltage input.

ProComp Infiniti offers internal, user-activated calibration to ensure that you can always obtain the highest quality signal, without the costly downtime associated with factory re-calibration.

In short, the ProComp Infiniti covers the full range of objective physiological signals used in clinical observation and biofeedback.

Housed in an ergonomically designed case and requiring only a USB port, ProComp Infiniti can be used with any IBM-compatible laptop or desktop PC. Whats more, ProComp Infiniti can capture data in real time by connecting directly to the PC via fiber-optic cable, or it can store data on a Compact Flash memory card for uploading later to the PC.

• USB connection
• Internal user activated re-calibration
• Ability to save directly to Compact Flash Memory Card
• Integrated impedence checking
• Higher Sampling rate
• Automatic sensor recognition
• Internal user activated re-calibration
• Ergonomic design
• Easy accessible dip switches
• Recessed fiber optic plug
• One Year Warranty

• Windows 9X/NT/2000/XP/Vista/Seven-based, mouse driven, intuitive user interface
• Realtime frequency analysis.
• User programmable waveform arithmetic, statistics/DSP.
• Fast 3D spectral arrays.
• High-quality laser printing.
• Software filters to export data to Microsoft Excel for further calculations.
• Realtime events and markers.

Infiniti Software

The Infiniti software is created in a modular fashion to ensure you get only what you need and do not fill your computers memory with unwanted software. The Developer Tools will allow for high end users to create their own screens, scripts and channel sets. This ultimately provides the customer with the most variety under one system.

The ProComp Infiniti hardware comes with the Infiniti Software and your choice of either the Electroencephalography (EEG) Suite or Physiology Suite.

When ordering, please specify which Suite you want to include. The second Suite may also be purchased for an additional $ 250.00. If using our shopping cart, just type into the comments box your Suite preference. When ordering by phone, please specify.

ProComp Encoder Comparison

• Electroencephalography (EEG) Suite or Physiology Suite
• Developer Tools
• 14 bit resolution, eight-channel ProComp Infiniti encoder unit
• TT-USB interface unit
• Fiber-optic cables (12 inch & 15 foot)
• Four alkaline AA batteries
• Sleek fabric storage and carrying case

• 15 Foot Fiber Optic Cable to USB (TT-USB interface) or COM port(Pro-SB)
• Impedance check (with optional EEG-Z sensor)
• Self-calibration: Yes
• Fast Channels: 2 channels, 2048 samples/sec DC-45Hz
• Slow channels: 5 channels 256 samples/sec DC-8Hz (shared with fast channels)
• Power Source: 4 1.5V AA Battery (20+ hours)
• Size (approx.) 130mm x 95mm x 37mm (5.1 x 3.7 x 1.5)
• Weight (approx.) 200g (7oz)
• Power Source 4AA batteries, single use alkaline or NiMh Rechargeable
• Supply Voltage 3.6V 6.5V (fiber optic), minimum 4.0V (Compact Flash)
• Battery Life, Alkaline cells 30h typical, 20h minimum
• Low-battery warning 20 30 minutes of battery life remaining
• Sensor supply voltage 7.260V 2mV
• ADC output 14bits
• Full-scale input range, DC 2.8V1.696V
• LSB magnitude 207uV
• Encoder channel bandwidth (3dB) and sample rate
  • DC 512Hz @ 2048 samples/second
  • DC 64Hz @ 256 samples/second
  • DC 64Hz @ 200 samples/second
  • DC 8Hz @ 32 samples/second
  • DC 8Hz @ 20 samples/second
• Anti-aliasing Filter 5th order Butterworth
• Alias rejection 30dB typical
• DC gain accuracy 0.5% (initial, or after self-calibration)
• DC offset 3LSB (initial, or after self-calibration)
• Overall system accuracy 5%
• Offset drift, calibration temperature 10C 5 LSB
• Encoder noise 150uV RMS, 1mV p-p typical, offset removed

General Requirements for Safety Compliant: UL60601-1 (R2003), CSA C22.2 601.1-M90 (R2005)

NOTE: ProComp Infiniti and its Sensor Heads and sensors are sensitive electronic instruments and should be handled as such. Be especially careful to avoid both pulling on the sensor cables and leads or getting moisture and gel on the sensor snaps. If necessary, wipe the surface with a damp cloth or use a moistened Q-tip to remove gel from inside the sensor snaps. Wipe with a dry cloth.

RECOMMENDED computer configuration:

• Desktop or laptop with two monitor capacity.
• CPU: 1.8GHz dual core processor or faster.
• Operating systems: - Microsoft® Windows® 7 Home Premium, Business, Ultimate, or Enterprise. - Microsoft® Windows Vista® Home Basic, Home Premium, Business, Ultimate, or Enterprise with Service Pack 2. - Microsoft® Windows® XP Professional or Home Edition with Service Pack 3.
• DirectX 9c or later (if this is missing, it will be installed with BioGraph Infiniti).
• 50 – 60 gigabytes hard disk space for video recording and processing. (The software needs 2.5 gigabytes to install and run.)
• Minimum RAM: 1 GB (Windows® XP) or 2 GB (Windows Vista® or Windows® 7).
• CD ROM or DVD drive.
• Video Card (minimum XGA, 1024 x 768 monitor resolution).
• 32 bit compatible sound card & speakers.
• 1 to 4 USB ports, depending on the desired number of Pro/Flex Infiniti encoders.
• 1 to 4 serial com ports, depending on the desired number of ProComp+ encoders.
• Mouse or compatible pointing device.
• Compact Flash Reader (for use with compact flash card only).
• Webcam 30 frames per second (for video purposes only).
• Internet access (for updating software and receiving technical support).
• Microsoft® Office with Word® and Excel® (for report generation and printing).
Microsoft Office 'Home and Student' DOES NOT WORK with the BioGraph Infiniti reporting functions.

"Office 'Home and Student' is licensed only for non-commercial use by households. It cannot be used for any commercial, nonprofit, or revenue-generating activities, by schools or academic institutions, or by any government organization." – Microsoft Corporation

Note that this license restriction is enforced through limitations on the software's functionality. BioGraph Infiniti's reporting functions require you to use Office 'Home and Business' or higher.

• Tele-Infiniti CF (T9600) version 3.2.1 or higher is compatible with 64-bit Windows® operating systems. Version 3.1 or lower is compatible with 32-bit Windows®.
• When using Windows® 7 Home Basic or Business or Windows Vista® Home Basic or Business, additional codecs must be installed to view camera and DVD.
• Low speed CPUs (1.8 GB or less) may be sluggish when running screens with multiple instruments.

Support documents are in Adobe PDF format. Get the latest version of Adobe Reader here. To save PDFs, right click and "Save link as..."

Physiology Suite Software Manual

ProComp Infiniti Hardware Quick Start & User's Guide

EEG Suite Software Manual

Version 5 New Features

Procomp Infiniti Hardware Manual