Biofeedback Equipment Accessories

Used Temperature Sensor

ProComp Infiniti (SA9310M) Temperature Sensor has a bead tip and is a Protected Pin style with a 4 pin barrel connector which slides into a receptacle located on a Thought Technology Encoder. Learn More

$160.00

Switch Sensor Cable for ProComp 2 with EEG-Z Sensor

The switch sensor cable enables you to trigger an impedance check with the EEG-Z sensor by pressing and releasing the switch button to briefly interrupt the sensor circuit. The EEG-Z sensor enters impedance checking mode, without requiring you to disconnect and reconnect the sensor. Learn More

$60.00

Used T9305M Infiniti EEG Sensor

EEG Sensor for use with Thought Technology Procomp Infiniti, Procomp+ or Procomp 2. Learn More

$150.00

Electro-Cap Tin Ear Electrodes Small Cups - 6mm

Electro-Cap Tin Ear Electrodes, 6mm earclips (2/pkg). A pair of pure tin cup electrodes with a 48" (122 cm) lead wire and a 1.5mm DIN connector. A spring-clip back, covered with plastic for patient comfort, is used to hold the electrode in place. For use with Electro-Caps, Smart Brain Games and other systems that use tin ear electrodes Part # ECA E5-6S Learn More

$34.95 As low as $34.25

EEG-Z Impedance Sensor Kit - SA9305Z

The Procomp Infiniti EEG-Z Impedance Sensor Kit (T9305Z) can be used for both Neurofeedback training and also works as an impedance meter. The EEG-Z works with the Flexcomp, Procomp Infiniti,Procomp2 or Procomp5 biofeedback / neurofeedback systems. Learn More

$535.00

Used Two Channel EEG Connectivity Kit

The EEG Connectivity Kit permits the use of a single reference for 2 channels. (requires two T8750) Learn More

$40.00

DC-EEG Monopolar/Bipolar Kit

This EEG lead kit allows users to make either monopolar or bipolar single channel measurements. 1.5 mm DIN Connector to disc. Sintered silver/silver-chloride (Ag/AgCl) EEG electrodes and ear clips for DC and low frequency EEG applications. Cable is appox 40" in length. Learn More

$215.00

EEG-Z3 Sensor

EEG-Z3 is a pre-amplified electroencephalograph sensor with built in impedance checking and 3 modes of operation: regular EEG mode (above 2 Hz), low frequency mode (above 0.01 Hz) for evoked potentials (EP) and low frequency applications and DC mode for true DC operation (above 0 Hz) for slow cortical potentials (SCP). Learn More

$595.00

E4S Electro-Cap Quick Insert Electrode

The E4S Quick insert electrode is a temporary electrode which will override the cap wiring in the event of a faulty electrode during a test. A Quick Insert Electrode may be placed into the mount of the faulty electrode and connected directly to the EEG machine until the cap can be properly repaired. Learn More

$15.95 As low as $15.63

Used TT-EEG Gold Cup Cable - Blue

The Thought Technology SA9323 is a single gold EEG cup electrode on one end with a 1.5mm (.060) DIN connection on the other. This gold EEG cup lead can be used with any standard DIN cable. Approximately 18" in length. Learn More

$15.00

Mon-Fri 9AM-5PM EST

Accessories

CONTACT INFO

Customer Service

Customer Care