Accessories

Filter
Set Descending Direction

218 items

per page
View as List Grid
  1. Used Temperature Sensor
    ProComp Infiniti (SA9310M) Temperature Sensor has a bead tip and is a Protected Pin style with a 4 pin barrel connector which slides into a receptacle located on a Thought Technology Encoder. Learn More
    $160.00
  2. Switch Sensor Cable for ProComp 2 with EEG-Z Sensor
    The switch sensor cable enables you to trigger an impedance check with the EEG-Z sensor by pressing and releasing the switch button to briefly interrupt the sensor circuit. The EEG-Z sensor enters impedance checking mode, without requiring you to disconnect and reconnect the sensor. Learn More
    $60.00
  3. CES Earclip Stimulus Cable (Red & Black)
    Red & Black earclip stimulus cable for use with the current ALERT Pro, Delight Pro and OASIS Pro devices only. Learn More
    $32.00
  4. Used T9305M Infiniti EEG Sensor
    EEG Sensor for use with Thought Technology Procomp Infiniti, Procomp+ or Procomp 2. Learn More
    $150.00
  5. Used MyoScan-Pro v2 sEMG Sensor
    The Myoscan-Pro V2 consists of 3 snap style receptacles - 2 active (positive & negative) and 1 reference (ground). Includes cable that connects the Sensor Head to the ProComp encoder. Operates in 60Hz environment. Warranty included - 6 Months. Learn More
    $295.00
  6. Electro-Cap Tin Ear Electrodes Small Cups - 6mm
    Electro-Cap Tin Ear Electrodes, 6mm earclips (2/pkg). A pair of pure tin cup electrodes with a 48" (122 cm) lead wire and a 1.5mm DIN connector. A spring-clip back, covered with plastic for patient comfort, is used to hold the electrode in place. For use with Electro-Caps, Smart Brain Games and other systems that use tin ear electrodes Part # ECA E5-6S Learn More
  7. EEG-Z Impedance Sensor Kit - SA9305Z
    The Procomp Infiniti EEG-Z Impedance Sensor Kit (T9305Z) can be used for both Neurofeedback training and also works as an impedance meter. The EEG-Z works with the Flexcomp, Procomp Infiniti,Procomp2 or Procomp5 biofeedback / neurofeedback systems. Learn More
    $535.00
  8. MyoScan-Pro v2 sEMG Sensor
    The Myoscan-Pro v2 (SA9401M-60) surface EMG sensor consists of 3 snap style receptacles - 2 active (positive & negative) and 1 reference (ground). Learn More
    $475.00
  9. Used Two Channel EEG Connectivity Kit
    The EEG Connectivity Kit permits the use of a single reference for 2 channels. (requires two T8750) Learn More
    $40.00
  10. DC-EEG Monopolar/Bipolar Kit
    This EEG lead kit allows users to make either monopolar or bipolar single channel measurements. 1.5 mm DIN Connector to disc. Sintered silver/silver-chloride (Ag/AgCl) EEG electrodes and ear clips for DC and low frequency EEG applications. Cable is appox 40" in length. Learn More
    $215.00
Filter
Set Descending Direction

218 items

per page
View as List Grid