Accessories

Filter
Set Descending Direction

215 items

per page
View as List Grid
  1. Used Temperature Sensor
    ProComp Infiniti (SA9310M) Temperature Sensor has a bead tip and is a Protected Pin style with a 4 pin barrel connector which slides into a receptacle located on a Thought Technology Encoder. Learn More
    $160.00
  2. Switch Sensor Cable for ProComp 2 with EEG-Z Sensor
    The switch sensor cable enables you to trigger an impedance check with the EEG-Z sensor by pressing and releasing the switch button to briefly interrupt the sensor circuit. The EEG-Z sensor enters impedance checking mode, without requiring you to disconnect and reconnect the sensor. Learn More
    $60.00
  3. Used T9305M Infiniti EEG Sensor
    EEG Sensor for use with Thought Technology Procomp Infiniti, Procomp+ or Procomp 2. Learn More
    $150.00
  4. EEG-Z Impedance Sensor Kit - SA9305Z
    The Procomp Infiniti EEG-Z Impedance Sensor Kit (T9305Z) can be used for both Neurofeedback training and also works as an impedance meter. The EEG-Z works with the Flexcomp, Procomp Infiniti,Procomp2 or Procomp5 biofeedback / neurofeedback systems. Learn More
    $535.00
  5. Used Two Channel EEG Connectivity Kit
    The EEG Connectivity Kit permits the use of a single reference for 2 channels. (requires two T8750) Learn More
    $40.00
  6. DC-EEG Monopolar/Bipolar Kit
    This EEG lead kit allows users to make either monopolar or bipolar single channel measurements. 1.5 mm DIN Connector to disc. Sintered silver/silver-chloride (Ag/AgCl) EEG electrodes and ear clips for DC and low frequency EEG applications. Cable is appox 40" in length. Learn More
    $215.00
  7. EEG-Z3 Sensor
    EEG-Z3 is a pre-amplified electroencephalograph sensor with built in impedance checking and 3 modes of operation: regular EEG mode (above 2 Hz), low frequency mode (above 0.01 Hz) for evoked potentials (EP) and low frequency applications and DC mode for true DC operation (above 0 Hz) for slow cortical potentials (SCP). Learn More
    $595.00
  8. Used TT-EEG Gold Cup Cable - Blue
    The Thought Technology SA9323 is a single gold EEG cup electrode on one end with a 1.5mm (.060) DIN connection on the other. This gold EEG cup lead can be used with any standard DIN cable. Approximately 18" in length. Learn More
    $15.00
  9. Used TT-EEG Gold Cup Cable
    The Thought Technology SA9323 is a single gold EEG cup electrode on one end with a 1.5mm (.060) DIN connection on the other. This gold EEG cup lead can be used with any standard DIN cable. Approximately 18" in length. Learn More
    $15.00
  10. SenseRx Vaginal Sensor
    Single user, vaginal sensor; compatible with most sEMG snap style monitor cables (may require adaptor). Learn More
Filter
Set Descending Direction

215 items

per page
View as List Grid