Sensors

ProComp Infiniti Heart Rate/BVP (SA9308M)sensor & cable is 48 inches (122.5 cm) in length and is terminated in a small plastic enclosure which houses both the Photodetector and LED. Used with Thought Technology ProComp Plus, ProComp Infiniti, ProComp 2, Procomp5, or Flexcomp series systems. Learn More

Skin Conductance sensor (SA9309M) for use with Thought Technology ProComp Plus, ProComp Infiniti, ProComp 2 or 5, or FlexPro series systems. Learn More

ProComp Infiniti (SA9310M) Temperature Sensor has a bead tip and is a Protected Pin style with a 4 pin barrel connector which slides into a receptacle located on a Thought Technology Encoder. Learn More

ProComp Infiniti respiration sensor & cable (SA9311M) is approximately 52 inches (132 cm) in length and is terminated in a stretch belt that will fit around either the thoracic (chest) or abdominal (stomach) area. The respiration sensor is a sensitive girth sensor worn using an easy fitting high durability woven elastic band fixed with a length adjustable webbing belt. It detects chest or abdominal expansion/contraction and outputs the respiration waveform. Learn More

The SA9503M surface EMG sensor consists of a triangular shape sensor head (SA9503M) with 3 snap style receptacles representing 2 active (positive & negative) electrodes and 1 reference (ground) electrode. Learn More

The Thought Technology pre-amplified electrocardiograph (ECG/EKG) sensor (T9306M) for the Procomp Infiniti Systems or Procomp+. Used for directly measuring electrical activity of the heart. Learn More

The Procomp Infiniti EEG-Z Impedance Sensor Kit (T9305Z) can be used for both Neurofeedback training and also works as an impedance meter. The EEG-Z works with the Flexcomp, Procomp Infiniti,Procomp2 or Procomp5 biofeedback / neurofeedback systems. Learn More

The Myoscan-Pro v2 (SA9401M-60) surface EMG sensor consists of 3 snap style receptacles - 2 active (positive & negative) and 1 reference (ground). Learn More

EEG-Z3 is a pre-amplified electroencephalograph sensor with built in impedance checking and 3 modes of operation: regular EEG mode (above 2 Hz), low frequency mode (above 0.01 Hz) for evoked potentials (EP) and low frequency applications and DC mode for true DC operation (above 0 Hz) for slow cortical potentials (SCP). Learn More

Toomim style HEG(Hemoencephalography)Headband for nIRS (Near infrared spectroscopy). The nIR ("near infra red") HEG (hemo-encephalography) headband measures brain blood oxygenation(blood color) using oximeter principles under the patent from Biocomp Research Laboratories. It can be used differentially (across the forehead from F7 to F8 (in the 10-20 system) according to particular training objectives. Designed for the Neurobit Optima 2 and 4 channel EEG/HEG units. Learn More