Accessories

Filter
Set Descending Direction

215 items

per page
View as List Grid
  1. Temperature Sensor for GP-4 , GP-8 and GP-12
    Temperature Sensor for GP-4 , GP-8 and GP-12 biofeedback devices from Physiocom Designs (formerly J&J Engineering). Learn More
    $50.00
  2. Used EEG-Z Impedance Sensor - SA9305Z
    The Procomp Infiniti EEG-Z Impedance Sensor(T9305Z) with DIN (T8740) can be used for both Neurofeedback training and also works as an impedance meter. The EEG-Z works with the Flexcomp, Procomp Infiniti,Procomp2 or Procomp5 biofeedback / neurofeedback systems. Learn More
    $215.00
  3. Used EMG Sensor for FlexComp/Myotrac
    The used SA9503M surface EMG sensor consists of a triangular shape sensor head (SA9503M) with 3 snap style receptacles representing 2 active (positive & negative) electrodes and 1 reference (ground) electrode. Learn More
    $150.00
  4. Monopolar / Bipolar EEG Electrode Kit - Thought Technology
    The T8750 EEG Electrode kit has DIN style EEG leads with DIN cable for the Thought Technology EEG Sensors. Includes cables for both Monopolar and Bipolar EEG placements. Includes (2) Gold Ear Clips and (2) Cup sensors - 22.5" in length and T8740 DIN Cable. Learn More
    $210.00
  5. Used Temperature Sensor
    ProComp Infiniti (SA9310M) Temperature Sensor has a bead tip and is a Protected Pin style with a 4 pin barrel connector which slides into a receptacle located on a Thought Technology Encoder. Learn More
    $160.00
  6. Switch Sensor Cable for ProComp 2 with EEG-Z Sensor
    The switch sensor cable enables you to trigger an impedance check with the EEG-Z sensor by pressing and releasing the switch button to briefly interrupt the sensor circuit. The EEG-Z sensor enters impedance checking mode, without requiring you to disconnect and reconnect the sensor. Learn More
    $60.00
  7. Used T9305M Infiniti EEG Sensor
    EEG Sensor for use with Thought Technology Procomp Infiniti, Procomp+ or Procomp 2. Learn More
    $150.00
  8. EEG-Z Impedance Sensor Kit - SA9305Z
    The Procomp Infiniti EEG-Z Impedance Sensor Kit (T9305Z) can be used for both Neurofeedback training and also works as an impedance meter. The EEG-Z works with the Flexcomp, Procomp Infiniti,Procomp2 or Procomp5 biofeedback / neurofeedback systems. Learn More
    $535.00
  9. MyoScan-Pro v2 sEMG Sensor
    The Myoscan-Pro v2 (SA9401M-60) surface EMG sensor consists of 3 snap style receptacles - 2 active (positive & negative) and 1 reference (ground). Learn More
    $475.00
  10. Used Two Channel EEG Connectivity Kit
    The EEG Connectivity Kit permits the use of a single reference for 2 channels. (requires two T8750) Learn More
    $40.00
Filter
Set Descending Direction

215 items

per page
View as List Grid